INTELLINET I-POE-INJCABLE Passive PoE Injector Splitter Kit – 9-57 V DC, 50 m Cat5e

The INTELLINET I-POE-INJCABLE lets you power non-PoE devices such as IP cameras, wireless routers, and embedded network hardware over a standard Ethernet cable, eliminating the need for a separate power outlet at the device end. The kit contains two units — a PoE injector and a PoE splitter — that work together to inject DC power from the device's original power supply at one end and extract it cleanly at the other end.

The injector has a male RJ45, a male DC power jack, and a female RJ45: the male RJ45 connects to your router or switch, the DC power jack connects to the non-PoE device's original power supply, and a Cat cable connects the female RJ45 through to the splitter. At the far end, the splitter's male RJ45 connects to the non-PoE device and its female DC power plug connects to the device's power input (typically 12 V or 5 V DC). Maximum cable run is 50 metres.

Key Features

• Passive PoE injector and splitter in one kit — enables PoE on non-PoE devices
• Supported output voltage: 9–57 V DC on RJ45 pins 4/5 (+) and 7/8 (−)
• Output current: 800 mA
• Data standard: Cat5e, EIA/TIA-568 compatible, Ethernet 10/100 Mbps
• Data pins used: 1,2 and 3,6 (LAN, unaffected by power injection)
• Maximum cable run: 50 metres (depends on power supply, cable type, and powered device)
• White PBT hard-plastic housing
• Injector DC socket: 5.5/2.1 mm × 12 mm

Product Benefits

• Removes the need for a separate mains socket at the non-PoE device location, reducing cabling work
• Passive design works with a wide range of voltages (9–57 V DC), covering cameras, routers, and modems that use different supply voltages
• Compatible with most non-PoE network devices available on the market — including IP cameras, modems, switches, and embedded computers
• 10/100 Mbps Cat5e data path means no bandwidth degradation on the LAN side
• Compact PBT housing is durable and suitable for in-ceiling or wall-cavity runs

Technical Specifications

• Model: INTELLINET I-POE-INJCABLE
• Type: Passive PoE injector + splitter kit
• Supported Output Voltage: 9–57 V DC (pins 4/5 (+), pins 7/8 (−))
• Output Current: 800 mA
• Data Standard: Cat5e, EIA/TIA-568, Ethernet 10/100 Mbps
• LAN Data Pins: Input pins 1,2 and 3,6; Output pins 1,2 and 3,6 + power pins 4,5 and 7,8
• Maximum Range: 50 metres
• Cable: 24AWG UTP
• RJ45 Socket Dimensions: 19 × 18.8 × 41.7 mm
• Maximum Length: 210 mm
• DC Socket: 5.5/2.1 × 12 mm
• Housing Material: PBT (hard plastic)
• Colour: White
• Operating Temperature: -20°C to 45°C
• Storage Temperature: -40°C to 70°C
• Operating Humidity: 10%–80% relative humidity
• Storage Humidity: 5%–90% relative humidity
• In the Box: 1x PoE Injector, 1x PoE Splitter

Why You'll Love It

• Single-cable solution for both data and power eliminates the need to run a separate power cable to remote devices
• Passive design requires no configuration — connect and it works immediately
• White PBT housing blends into ceiling and wall installations without drawing attention
• 50-metre range covers most in-building cable runs from a central network cabinet to a device

• Technical drawing Intellinet i poe injcable, English PDF